Skip to main content

thumbnail
1/6

Take a Closer Look

  • Extended Flight Time

    Matrice 400 has a forward flight time of up to 59 minutes [2], a hover time of up to 53 minutes [6], and an IP55 protection rating [7].

  • Upgraded Payload Capacity

    Depending on the task, Matrice 400 can be equipped with the Zenmuse H30 Series, L2, P1, S1 Spotlight, Manifold 3[8], or third-party payloads.

  • Power-Line-Level Obstacle Sensing

    With LiDAR, mmWave radar and low-light fisheye vision sensors, Matrice 400 detects power lines across mountainous terrain — even in darkness [3].

  • Enhanced Intelligence & Efficiency

    Matrice 400 boosts efficiency with Smart Detection, Smart AR Projection, Real-Time Terrain Following [9], and ship-based takeoff/landing [10].

  • Easier Automated Operations

    Matrice 400 enables automated power line inspection flights with Zenmuse L2 [8], as well as Slope and Geometric Route planning with FlightHub 2.

  • Comprehensive Accessory Upgrades

    Matrice 400 works with RC Plus 2 Enterprise Enhanced, Cellular Dongle 2 [11], TB100 battery, TB100C tethered battery, and BS100 battery station.

Learn more

In the Box

  • DJI Matrice 400

    DJI Matrice 400

    × 1

  • TB100 Intelligent Flight Battery

    TB100 Intelligent Flight Battery

    × 1

  • BS100 Intelligent Battery Station

    BS100 Intelligent Battery Station

    × 1

  • DJI RC Plus 2 Enterprise Enhanced

    DJI RC Plus 2 Enterprise Enhanced

    × 1

  • DJI RC Plus 2 sub2G SDR Module

    DJI RC Plus 2 sub2G SDR Module

    × 1

  • DJI RC Plus 2 Strap and Bracket Kit

    DJI RC Plus 2 Strap and Bracket Kit

    × 1

  • DJI Matrice 400 2510F Propeller

    DJI Matrice 400 2510F Propeller

    × 1

  • DJI Matrice 400 Gimbal Damper

    DJI Matrice 400 Gimbal Damper

    × 1

  • DJI Matrice 400 Carrying Case

    DJI Matrice 400 Carrying Case

    × 1

  • Rotating LiDAR Calibration Cover

    Rotating LiDAR Calibration Cover

    × 1

  • Front Propeller Holder

    Front Propeller Holder

    × 1

  • Rear Propeller Holder

    Rear Propeller Holder

    × 1

  • USB-C to USB-C Data Cable

    USB-C to USB-C Data Cable

    × 1

  • WB37 Battery

    WB37 Battery

    × 1

  • E-Port V2 Rubber Port Cover

    E-Port V2 Rubber Port Cover

    × 2

  • Rubber Plug Screws (2×2)

    Rubber Plug Screws (2×2)

    × 4

  • Screws and Tools

    Screws and Tools

    × 1

  • Cleaning Tools

    Cleaning Tools

    × 1

Let’s Answer Your Questions

  • What is the ingress protection (IP) rating of DJI Matrice 400? Can I fly the drone in the rain?

    It is IP55 rated. Do not fly in rain heavier than 100 mm/24 hr.

    The IP rating is not permanently effective and may decrease due to product wear and tear.

  • Which payloads are compatible with DJI Matrice 400?

    Gimbal Cameras: Zenmuse H30, Zenmuse H30T, Zenmuse L2 and Zenmuse P1

    Functional Accessories: Zenmuse S1 Spotlight, Zenmuse V1 Speaker, Manifold 3, DJI RC Plus 2 sub2G SDR Module, DJI Cellular Dongle 2

    RTK Station: D-RTK 3 Multifunctional Station, D-RTK 2 Mobile Station

    Ecosystem Accessories: DJI X-Port

    DJI E-Port V2 Development Kit

    DJI E-Port V2 Coaxial Cable Kit

    DJI SKYPORT V3 Adapter Set

    DJI SKYPORT V3 Coaxial Cable Kit

  • Can I use the accessories of DJI Matrice 400 on Matrice 350?

    Accessories for DJI Matrice 400 and Matrice 350 are not compatible with each other.

  • How long does it take to fully recharge one TB100 Intelligent Flight Battery?

    With a 220 V power supply: In fast charging mode, it takes approximately 45 minutes to fully recharge one DJI Matrice 400 battery. In silent mode, it takes approximately 110 minutes to fully recharge one DJI Matrice 400 battery.

    With a 110 V power supply: In fast charging mode, it takes approximately 70 minutes to fully recharge one DJI Matrice 400 battery. In silent mode, it takes approximately 110 minutes to fully recharge one DJI Matrice 400 battery.

    Charging time is measured in a test environment with a temperature of 25° C.

  • How to upgrade the firmware of DJI Matrice 400?

    The following methods can be used to upgrade the firmware:

    1. Connect the aircraft to the computer to upgrade the firmware of the aircraft and remote controller through DJI Assistant 2 (Enterprise Series).

    2. Use DJI Pilot 2 to update the firmware of the aircraft, remote controller.

    3. Visit the official DJI website to download the offline firmware update package for the aircraft and remote controller. Then, insert the SD card storing the firmware package into the remote controller for offline update.

Still have questions? Get help from a DJI expert.

* Always check and strictly abide by local laws and regulations before use.

** All data on this page was collected with a production model of DJI Matrice 400 in a controlled test environment. Actual experience may vary depending on the environment, usage, and firmware version.

1. The 6 kg payload is measured at the third gimbal connector under sea level conditions. Payload capacity decreases as altitude increases. For details, refer to the official user manual.

2. Measured with the aircraft flying forward at a constant speed of 10 m/s in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), and from 100% battery level until 0%. Data is for reference only. Actual experience may vary depending on the environment, usage, and firmware version.

3. Power line obstacle sensing capability: When directly facing a transmission line (21.6 mm steel-core aluminum stranded wire), obstacle sensing is supported at speeds up to 25 m/s. When both transmission lines (21.6 mm steel-core aluminum stranded wire) and distribution lines (12 mm steel-core aluminum stranded wire) are present, obstacle sensing is supported at speeds up to 17 m/s. Obstacle sensing performance may vary depending on environmental conditions (such as cloud, fog, rain, or snow), as well as the material, position, and shape of the target object. Due to the limitations of the safety system, the aircraft cannot actively avoid fast-moving objects; please fly with caution in such environments. Refer to the user manual for more information. The mmWave radar function is unavailable in some countries/regions.

4. This feature is unavailable in countries or regions without 5GHz frequency support. Refer to local laws and regulations for more information.

5. Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.

6. Measured with the aircraft hovering in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), and from 100% battery level until 0%. Data is for reference only. Actual usage time may vary depending on the flight mode, accessories, and environment.

7. Please follow the requirements stated in the IP55 protection rating instructions. Measured in a controlled environment. The IP rating is not permanently effective and may decrease due to product wear and tear.

8. Sold separately.

9. DJI FlightHub 2 required.

10. It is recommended to use when the ship speed is below 10 knots and the wind speed is below 5 m/s; exercise caution in other environments. It is recommended to reserve a 3 m × 3 m takeoff and landing space on the deck. Standard landing point pattern files are available on the download page.

11. To use 4G Enhanced Transmission, the remote controller must be equipped with the DJI Cellular Dongle 2 (sold separately) or connected to the internet via Wi-Fi. This service is not available in some countries and regions. Please consult your local dealer for details.